How to Connect Rockspace Extender to Router?
Do you want to extend your existing network range? If you nod in yes, then you must perform Rockspace WiFi extender setup. After setting up the extender, you will get uninterrupted WiFi to access in areas with poor or no internet zone. But, Rockspace extender setup can be performed in a hassle-free manner only if you connect it (the extender) to your host router. What happened? Don’t know the process of connecting them? Need not to worry! 99 percent are unaware of the process eagerly want to know how to do it. If you also want to know how to connect Rockspace extender to router, this post can be of great help to you. Here, we have jotted down two easy ways following which connecting extender and router will be a walk in the park for you. Let’s get started!
Before proceeding further, make sure that the firmware of your router is up-to-date and compatible with your Rockspace extender.
How to Connect Rockspace Extender to Router
There are two easy methods through which you can connect your Rockspace WiFi extender and router.
One: Using an Ethernet cable
Two: Using the WPS method
Both of the processes are very easy to execute. Hence, without delay go through the instructions highlighted below and know how to connect Rockspace extender to router in blink of an eye. Keep reading!
Connect Rockspace Extender to Router using Ethernet Cable
The instructions to connect the WiFi range extender to your host router using an Ethernet cable are highlighted below:
- Step 1: Place your Rockspace extender and router in close proximity.
- Step 2: Once you are done, plug them in to a working power socket and turn them on.
- Step 3: The power LEDs on your devices will start blinking. Once the LEDs of your range extender and router gets stable, apply the 4th step.
- Step 4: Take an Ethernet cable and connect its one end into your router and other end into your Rockspace device. Be certain that the cable you have used is in working condition and doesn’t have any damages on it.
And, there you are! In this manner, your Rockspace extender and your host router can be connected via Ethernet cable. Now, scroll down a little and know how to connect Rockspace extender to router using the WPS method.
Connect Rockspace Extender to Router using WPS Method
Here are the step-by-step instructions that will connect your Rockspace extender and router via WPS source. WPS means WiFi Protected Setup! It is one of the easiest methods that will help connecting your devices while relaxing on your couch.
Step 1: You must place your Rockspace extender and router at a safe distance. The term “safe distance” means that both of them (extender and router) should be placed neither too close nor too far.
Just in case you see that there are no wall sockets closer for plugging in your devices, you can use the extension cord or place them in an area in your home where you find two wall sockets, regardless of having a distance of 10-20 feet.
Step 2: Power them up and ensure that they (your extender and router both) are receiving steady power supply from their respective power sockets.
Step 3: Now, press the WPS button on your host router and wait for 2 minutes.
Step 4: Then, you need to press the WPS button on your Rockspace WiFi range extender.
That’s it! Until you are done with step 4, your WiFi extender and router will be connected using the WPS process.
The Last Words
Rockspace WiFi extender is undoubtedly one of the best WiFi devices to consider in today’s modern era to get stronger WiFi range to access everywhere in your home. With the help of this smart extender, tens of millions of users get blazing-fast internet speed throughout their home. But, to enjoy super-speedy internet, you have to connect Rockspace extender and router, and perform Rockspace WiFi extender setup process.
Our blog post on how to connect Rockspace extender to router ends here. We really hope that the two methods along with their instructions we have provided here will help you make a secure and solid connection between your devices.