Rockspace Extender Not Working? Let’s Fix It!

In the age of connectivity, a reliable and strong WiFi signal has become a necessity. Millions of people perform Rockspace extender setup in their houses to enhance WiFi coverage and eliminate dead zones. But, like other networking devices, Rockspace users might encounter the Rockspace extender not working issue due to some possible reasons. If you’re also experiencing the same with your Rockspace extender, worry not! In this blog, we’ll walk you through common issues and solutions to get your extender up and running smoothly once again. Keep reading!

Reasons for Rockspace Extender Not Working

Let’s talk about the big reasons why your device might not be working like it should. This will help you understand why this is happening and make it easier for you to fix the problem quickly.

Not Enough Power

The first reason could be that your device doesn’t have enough electricity. If it doesn’t get the right amount of power from the wall outlet, it won’t work properly.

Bad Placement

Where you place the extender matters a lot. If you put it in the wrong place, your internet might not be good. So, the place where you put your device is important.

Broken Cable

Sometimes, the cable that connect the extender to the router can be broken or not plugged in well. This can make the extender not work like it’s supposed to.

Old Software

Your device might not work well if it’s using old software. Just like how you update your phone, your device needs updates too.

Long Distance

Distance between the devices plays a crucial role. If you place your extender at an excessive distance from the router, then it’s obvious to face the extender not working issue.

Hence, these were the reasons that caused the Rockspace extender to not work. But you don’t need to worry. This issue is fixable you can fix it by implementing the further mentioned solutions.

Solutions for Rockspace Extender Not Working Issue

Check the Power Connection

First, you need to ensure that your extender is plugged into a working wall outlet and that its lights are on. Plus also check that the extender is properly connected to the router. Make sure it is securely connected.

Restart the Extender

Sometimes, a quick restart can solve the issue. Unplug the extender from the power outlet, wait for about 10 seconds, and then plug it back in. Give it a minute to boot up and try connecting again.

Placement of Extender

The placement of the extender is important. Keep it within a reasonable distance from your router and avoid obstructions like walls and metal objects. This helps ensure a strong and stable connection.

Remove Wireless Interference

To remove the WiFi interference from the device follow the following steps as mentioned:

If the issue persists, consider updating the extender’s firmware or performing a factory reset.

Update the Extender

Now you should update the extender to fix the Rockspace extender not working issue. Maybe your device will work properly after the update. First, check if there’s a firmware update available for your extender. Manufacturers release updates that can improve performance and fix bugs. Visit the Rockspace website and follow their instructions to update the extender’s firmware.

Reset the Extender

If the previous steps don’t work, you can try resetting the extender to its default settings. Look for a small reset button on the extender and press it using a paperclip or a similar tool. Hold it down for about 10 seconds, and the extender will reset. Then, you can set it up again from scratch.

Hence, these are the solutions that you can use to fix the Rockspace extender not working issue.

Conclusion,

Now you know the reason behind the Rockspace extender not working issue. This issue can be fixed easily by implementing the above-mentioned troubleshooting tips. Once the issue is resolved, you will get the blazing fast internet speed in the all corner of your house.